Na'urorin ƙarfe na ƙarfe ko aluminium waɗanda aka fi amfani da su a cikin layin watsawa ana kiran su gaba ɗaya azaman kayan aiki.Akwai nau'ikan kayan aiki iri-iri da amfani daban-daban, kamar nau'ikan nau'ikan nau'ikan wayoyi don shigar da wayoyi, madaukai daban-daban masu rataye waɗanda ke samar da zaren gefuna, nau'ikan bututu daban-daban da bututun gyara bututu don haɗa wayoyi, da nau'ikan gibi iri-iri akan tsagawar wayoyi.Sanda, da dai sauransu, baya ga kowane nau'in kayan aikin ja na waya da ake amfani da su don sanduna da hasumiya, da kuma girman masu kula da kariya, dole ne su dace da juna.
Yawancin kayan aiki suna buƙatar jure babban tashin hankali yayin aiki, kuma wasu dole ne su tabbatar da kyakkyawar hulɗar lantarki a lokaci guda.Yana da alaƙa da amincin waya ko hasumiya.Ko da ya lalace kawai, yana iya haifar da gazawar layi.Sabili da haka, inganci, daidaitaccen amfani da shigarwa na kayan aiki yana da wani tasiri akan shigarwa da watsa layin wutar lantarki.
| GB 2314-97 | Janar yanayin fasaha don kayan aikin wutar lantarki |
| GB/T 2317.1-2000 | Hanyar gwajin injin kayan wuta |
| GB/T 2317.3-2000 | Hanyar gwajin zagayowar thermal don kayan aikin wuta |
| GB/T 2317.4-2000 | Ka'idodin yarda da ikon wutar lantarki, alamu da marufi |
| GB/T 9327.4-1988 | Cable shugaba matsawa da inji dangane hadin gwiwa Hanyar gwaji Hanyar Thermal sake zagayowar gwajin Hanyar |
| GB/T 5075-2001 | Kalmomin kayan aikin wutar lantarki |
| DL/T 765.1-2001 | Yanayin fasaha na kayan aiki don layin rarraba sama |
| DL/T 768.7-2002 | Wutar lantarki kayan aiki Manufacturing ingancin karfe sassa zafi-tsoma galvanized Layer |
| DL/T 683-1999 | Hanyar suna samfurin don kayan aikin wuta |
| GB/T 5231-2001 | Haɗin sinadarai na jan ƙarfe da jan ƙarfe da aka sarrafa da siffar samfur |
| GB/T 1175-1997 | Zubar da zinc gami |
| Q/ZDJ 50-2006 | Bukatun fasaha don matsi mai huda gefen tare da ƙimar ƙarfin lantarki na 10kV da ƙasa |
Abubuwan daidaitattun sassan kasuwa na yanzu sun haɗa da carbon karfe, bakin karfe, da tagulla.1. Karfe Carbon: Mun bambanta ƙananan ƙarfe na ƙarfe, matsakaici-carbon karfe, babban carbon karfe, da gami karfe da carbon abun ciki na carbon karfe kayan.1 Low-carbon karfe C%≤0.25% yawanci ake kira A3 karfe a kasar Sin.Ana kiransa da asali 1008, 1015, 1018, 1022, da sauransu a waje.Yafi amfani da kayayyakin da babu taurin bukatun kamar sa 4.8 kusoshi, sa 4 kwayoyi, kananan sukurori, da dai sauransu. 0.45%.Ba a yi amfani da ƙarfe na ƙarfe 4 a kasuwa ba: ana ƙara abubuwan alloying zuwa ƙananan ƙarfe na carbon don haɓaka wasu abubuwan musamman na ƙarfe: kamar 35, 40 chromium molybdenum, SCM435, 10B38.Fangsheng sukurori, yafi amfani da SCM435 chromium-molybdenum gami karfe, babban aka gyara su ne C, Si, Mn, P, S, Cr, Mo. Na biyu, bakin karfe: aikin matakin: 45, 50, 60, 70, 801 yafi raba austenite. (18% Cr, 8% Ni), kyakkyawan juriya na zafi, juriya mai kyau, da kyakyawar weldability.A1, A2, A42 martensite da 13% Cr suna da juriya mara kyau, ƙarfin ƙarfi da juriya mai kyau.C1, C2, C4 ferritic bakin karfe.18% Cr yana da mafi kyawun tashin hankali da juriya na lalata fiye da martensite.Abubuwan da ake shigo da su a kasuwa galibi daga Japan ne.Dangane da matakin, an raba shi zuwa SUS302, SUS304, da SUS316.3. Copper: Abubuwan da aka fi amfani da su shine tagulla…zinc-Copper gami.Kasuwa galibi tana amfani da H62, H65, H68 tagulla azaman daidaitattun sassa.
Lokacin aikawa: Juni-21-2021